ºÚÁϲ»´òìÈ

ºÚÁϲ»´òìÈ Huntsville Specialties

ºÚÁϲ»´òìÈ Nuclear

Our key services include:

Qualification Test Services
• Four Seismic Simulators
• Six Accident Test Autoclaves
• One 150 psi, 3,000 lbs. per hour boiler
• 300KW Steam Super Heater System
• One Boron Chemical Spray Injection System
• Seven EMI Test Rooms

Third Party Qualification
• Sole Supplier of Yokogawa Products
• 4000+ previously qualified items
• Cybersecurity Services
• Material Verification

Valve Testing Services
• Three Safety Relief Valve Test Cells for steam, water and air
• UPGRADED Full Flow Steam Test System to 2,000,000 lbs/hr max. and 1400 psi max.
• Full Flow Hot Water Test System 2200 psi
• Hot Water Closed Loop Flow System 30,000 gallons
• Cold Water Closed Flow Loop System 60,000 gallons
• Two 3,000 psi, 6,000 lbs. per hour boilers & One 1,500 psi 12,000 lbs. per hour boiler

Detailed Services
• Safety Relief Valve Testing and Certification Services (ASME OM Code, Set Pressure, Seat Leakage and Operability with Steam/Water/Air, and Repair Support)
• Valve and other Fluid Component Testing Services (ASME QME-1, Hot and Cold Cycle Testing, Flow Interruption, Deflection and Modal Testing, Steam/Water/Air)
• Snubber Inspection, Testing and Refurbishment Services (ASME OM Code, Removal, Installation, Inspection, Repair, Refurbishment)
• Equipment Qualification Engineering and Testing Services (Radiation Aging, Thermal Aging, Cycle Aging, EMI, Seismic, and Accident (LOCA) Simulation)
• Safety Related Equipment Supply and Third Party Qualification (NTS is the Exclusive Provider of Yokogawa Instruments and Replacement Parts)

Radioactive Material Licensed

ºÚÁϲ»´òìÈ Nuclear holds a Radioactive Material License and is audited by the US Nuclear Regulatory Commission (USNRC), Nuclear Procurement Issues Committee (NUPIC), and Nuclear Industry Assessment Committee (NIAC). The lab offers full-service engineering and testing organization to support electrical and mechanical equipment qualification to the requirements of 10CFR50.49 and IEEE Standards 323 and 344.

ICAP Certified

ºÚÁϲ»´òìÈ Nuclear has earned IEEE’s Conformity Assessment Program (ICAP) Certification. The ICAP certification permits ºÚÁϲ»´òìÈ to connect directly to manufacturers through a standard of product qualification testing and standardized reporting resulting in streamlined approval processes for customers worldwide.

ICAP certification is important for expediting market adoption while reducing implementation costs. The program is specifically designed to ensure product conformity to IEEE standards, thus reducing testing burdens on manufacturers that need to meet multiple programs for different end-users or buyers. ICAP also enables trade across state and international boundaries with the assurance of operating safely and reliably within certain measurable performance criteria.

Other Specialties at ºÚÁϲ»´òìÈ Huntsville

EMI/EMC Testing

Key services:
• Radiated Susceptibility ~ 200 V/m, Frequency Range 10 kHz to 40 GHz,
• HIRF Testing 100 MHz – 18 GHz to 7200 V/m pk
• Radiated Emissions ~ 30 Hz to 40 GHz
• Large Semi-Anechoic Screen Room
• High Temperature Vehicle Exhaust System
• Five MIL/AERO Semi-Anechoic Chambers
• Extended Ground Plane Test Beds
• Indirect Lightning-Single Stroke, Multiple Stroke, Multiple Burst, Level 5 DO-160
• AC & Telecom Port Surge, Electrical Fast Transients, Ring-wave, and Bust Testing
• Electrical Power Characteristics Testing
• Airborne Acoustic Noise and Structure-Borne Noise
• Antenna Characterization
• Shielding Effectiveness, Transfer Impedance
• Electrostatic Discharge to 30 kV
• Electromagnetic Pulse (EMP) to 50 kV/m
• HERO
• RADHAZ Analysis
• AC Power Fault

Dynamics and Structural Testing

When it is time to verify that products are ready for real-world applications, you can count on a wide selection of advanced dynamics and structural testing services. This is particularly beneficial for mass-produced motorized products such as components intended for use in vehicles, aircraft, and other machines where reliability is critical. Regardless of your industry, you can get expert services in the following areas:

• Vibration: Electrodynamic, Electrohydraulic (Uniaxial, Biaxial, and Triaxial, Payloads to 75,000 Pounds)
• Shock: Classical shock, Shock synthesis, MIL-S-901D Light Weight Shipboard High Impact Shock
• Pyroshock: Ordnance to 50kg and 20,000 Hz, Electrodynamic to 2kg and 10,000 Hz
• Drop and Pre-Accelerated Drop: Half-Sine, Terminal-Peak Sawtooth, Square Wave 3,000g Amplitude, 100 MS Envelope, 4′ x 4′ Speciment
• HALT / HASS
• Parallel Pendulum: Half-Sine, Terminal Peak Sawtooth, Square Wave 100g Maximum Amplitude, 60 MS Envelope, 8′ x 8′ Specimen Footprint
• Acceleration
• Structural Load Testing

Acoustic Noise Chamber Testing, Design, and Refurbishment

The engineers at the Huntsville laboratory specialize in a wide range of acoustics testing, including high intensity acoustic noise and progressive wave acoustic noise. The engineers at the lab provide support, testing, and engineering services for the design of specialized test equipment, including the WAS 3000 and WAS 5000 Acoustic Noise Generators, Many industries require the accurate measurement of the level of sound that products emit in order to adequately protect technicians, users and others in close proximity to the noise the equipment produces.

We conduct acoustic noise testing to meet the requirements of regulatory bodies like OSHA, telecommunications companies like AT&T and Verizon, medical equipment regulators, and business equipment regulators. We also help companies comply with the standardization of military and defense equipment.

Industry standards that cover acoustic noise testing include:
• ISO 9296
• ISO 7779
• ISO 3744
• GR-63-CORE
• ETSI EN 300 753
• IEC 60601
• MIL-STD-1474D (previously MIL-STD-740)

High-Flow Steam, Water, and Air

At ºÚÁϲ»´òìÈ Huntsville, we offer a comprehensive selection of services including engineering, analysis, and robust testing of equipment, such as motor operated valves (MOVs) intended for use in operating environments of high-flow steam and water. Fluid flow capabilities at the laboratory encompass wide range of areas, including pneumatic, hydraulic, fuels, steam, cryogenics, and more. With testing expertise that can help you throughout the entire lifecycle of your products, you get everything from evaluating prototypes for OEM qualification to troubleshooting high-flow steam and water valves already in use. Contact us today—and learn how you can get the expert testing you need.

Calibration Services

We provide calibration and metrology services, including the operation of a Type 1 Metrology Laboratory for NASA. Key calibration services include:
• Accelerometers, Humidity/Temperature, Pressure, DC/Low Frequency, Dimensional/Frequency, Mass/Resistance, pH/Torque
• 10CFR50 appendix B compliance
• ANSI/NCSL Z540-1-1994
• NIST Traceable

Client Portal | Portail client